tire shredding EPT recycle gear tire shredders rubber value
The EPT tire recycling EPT will be managed by the PLC, all the resources will be procedure inside of of EPTs, there is True ZERO Air pollution. one labor, one engineer can function all the EPTs, no need to operate the EPTs, just handle the PLC. the EPTs can shield the EPTs, operate the EPTs and hold the EPTs work efficiently.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automatic control program, with automated reversal manage system in overload condition. Two-shaft tire crusher is EPTly created for aged tires with low velocity and high torque to decrease sounds and EPT use.
The blade of the shredEPTis produced of substantial quality steel and subjected to Bodycote warmth therapy to accomplish the ideal crushing functionality.The shredEPTis easy to disassemble and adjust cutter blade and suited for tearing big, additional thick and tough resources.The thickness assortment of the crushing blade is 25mm-152mm in accordance to the tire type,output and closing solution. The grinEPTcan procedure OTR tires,huge truck tires,car tires and so on at the velocity of one-30tons whithin one hour.
| Model | Input measurement | Output dimensions | Cappacity | Motor | Blades quantity | Proportions | Weight |
| TS-800 | 800mm | fifty*50mm | 1-2T/h | two*22kw | 16pcs | four*two.6*three.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | three-5T/h | two*37kw | 20pcs | four.8*two.eight*three.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | 6-8T/h | 2*45kw | sixteen-30pcs | 5*2*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | two*55kw | 20-24pcs | five.six*2*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | 10-15T/h | two*75kw | twenty-30pcs | 6*2.4*4m | 36T |
| TS-2400 | 2400mm | one hundred-200mm | twenty-30T/h | 2*110kw | 16-24pcs | seven.four*three.two*five.2m | 56T |
2.Rasper
EPT tire shredding technique is created to generate up to 6 tons per hour of wire free of charge rubber mulch.This method makes up to a ninety nine% wire totally free chip ranging in dimensions amongst twelve-25mm depending on the preferred dimensions.Following processing,the metal is taken out by our magnetic separation technique.At this level,the wire cost-free rubber chips are completely ready to be coloured and utilized for landscaping mulch and the steel is ready to be baled and sold to smelters.
| Rasper | Motor | EPT | Ability | Proportions | Bodyweight | Chopping chamber | Closing product |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.4*1.two*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.7*one.7*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven-hundred-1T/H | 2*2*4.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.1*2.one*4.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | two*two.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | three-6T/H | 6.2*2.1*three.6m | 12400kg | 697*1562mm | 10-30mm |
3.Granulator EPT
Squander Tire Recycling Rubber Granule Producing EPT is adopting bodily recycling strategy and is designed to grind the rubber mulch from the rasper into small granules as good as 1-6mm. The granules are screened and re-circulated till the desired dimension is achieved. This Totally-Automatic Tyre Recycling Line working in normal temperature, no require to incorporate any other chemical substances, no pollution to the atmosphere. This is the ideal way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Proportions | one.eight*one.six*2.4m | 1.8*one.nine*two.4m | two.two*2.three*3m |
| Closing item | 1-6mm | 1-6mm | 1-6mm |
4.Miller
Rubber powEPTis the last end result of ambient tire recycling.At this stage,crumb rubber is ground down into a clear powEPTform with nearly all steel and fiber eliminated.Rubber powEPThas quite a few secondary utilizes from injection molding goods,coatings,roofing components and numerous asphaltapplications.
Rubber powEPTis usually located in 40-seventy four microns(.forty-.74mm) in size.This micron measurement metarial has the advantage of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and finished products.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter product | Large duty truck tyres to bicycle tyres | |||
| Enter dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output size | shred to 30-120 mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a manufacturing facility or a trading business?
A. We are a company with 30 a long time production knowledge in tire recycling EPT. We have export license, we can offer you you the manufacturing facility costs.
Q2. Can you promise the ability as you mentioned ?
A. Definitely of course,apart from that,we also provide 3-5years warranty.
Q3, are you confident the ultimate rubber powEPTcan be completely thoroughly clean out of wire steel or nylon ?
A. The final powEPTpurity can reach ninety nine.9%. we have magnetic separator which can independent the wire steel from the rubber powder.
