Tyre Recycle EPT Tyre cutter Crumb Rubber EPT
The EPT tire recycling EPT will be controlled by the PLC, all the materials will be procedure inside of EPTs, there is True ZERO Air pollution. one labor, one engineer can operate all the EPTs, no require to operate the EPTs, just management the PLC. the EPTs can shield the EPTs, function the EPTs and preserve the EPTs work efficiently.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automated manage system, with automatic reversal manage technique in overload condition. Two-shaft tire crusher is EPTly made for aged tires with minimal speed and high torque to reduce noise and EPT consumption.
The blade of the shredEPTis manufactured of high quality steel and subjected to Bodycote warmth therapy to achieve the ideal crushing functionality.The shredEPTis effortless to disassemble and modify cutter blade and ideal for tearing huge, additional thick and difficult materials.The thickness variety of the crushing blade is 25mm-152mm according to the tire variety,output and final item. The grinEPTcan procedure OTR tires,massive truck tires,automobile tires and so on at the velocity of one-30tons whithin one hour.
| Product | Input dimensions | Output size | Cappacity | Motor | Blades quantity | Proportions | Bodyweight |
| TS-800 | 800mm | 50*50mm | 1-2T/h | 2*22kw | 16pcs | four*two.6*three.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | 2*37kw | 20pcs | four.8*2.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | two*45kw | sixteen-30pcs | 5*2*3.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | seven-10T/h | 2*55kw | 20-24pcs | five.6*2*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | ten-15T/h | 2*75kw | twenty-30pcs | 6*two.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | 2*110kw | 16-24pcs | seven.four*three.2*5.2m | 56T |
2.Rasper
EPT tire shredding program is made to create up to six tons for every hour of wire free rubber mulch.This program generates up to a ninety nine% wire cost-free chip ranging in dimensions amongst twelve-25mm dependent on the desired dimension.After processing,the steel is taken off by our magnetic separation technique.At this stage,the wire cost-free rubber chips are all set to be coloured and employed for landscaping mulch and the metal is prepared to be baled and sold to smelters.
| Rasper | Motor | EPT | Potential | Dimensions | Bodyweight | Reducing chamber | Last merchandise |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.four*one.2*two.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.7*one.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven hundred-1T/H | 2*two*4.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | two.1*two.one*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | 2*two.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*2.one*three.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Producing EPT is adopting physical recycling approach and is created to grind the rubber mulch from the rasper into modest granules as wonderful as 1-6mm. The granules are screened and re-circulated until finally the wanted measurement is reached. This Fully-Automatic Tyre Recycling Line working in standard temperature, no need to have to insert any other chemical compounds, no air pollution to the environment. This is the very best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | one.8*1.6*2.4m | 1.eight*1.9*2.4m | 2.2*two.three*3m |
| Last merchandise | 1-6mm | one-6mm | 1-6mm |
4.Miller
Rubber powEPTis the closing consequence of ambient tire recycling.At this phase,crumb rubber is ground down into a thoroughly clean powEPTform with nearly all steel and fiber eliminated.Rubber powEPThas numerous secondary employs from injection molding products,coatings,roofing resources and numerous asphaltapplications.
Rubber powEPTis usually located in forty-seventy four microns(.forty-.74mm) in dimensions.This micron dimensions metarial has the gain of currently being incorporated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and concluded products.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input product | Heavy obligation truck tyres to bicycle tyres | |||
| Input size | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to thirty-one hundred twenty mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
FAQ:
Q1,Are you a manufacturing facility or a investing organization?
A. We are a manufacturer with 30 years generation experience in tire recycling EPT. We have export license, we can offer you you the factory charges.
Q2. Can you guarantee the capacity as you talked about ?
A. Undoubtedly sure,except that,we also give 3-5years guarantee.
Q3, are you positive the final rubber powEPTcan be entirely cleanse out of wire steel or nylon ?
A. The closing powEPTpurity can attain ninety nine.9%. we have magnetic separator which can different the wire steel from the rubber powder.
