used rubber tires recycling EPT rubber tire crusher
The EPT tire recycling EPT will be managed by the PLC, all the resources will be method within of EPTs, there is Real ZERO Pollution. 1 labor, one engineer can work all the EPTs, no want to run the EPTs, just control the PLC. the EPTs can shield the EPTs, perform the EPTs and keep the EPTs perform easily.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC computerized control technique, with computerized reversal control system in overload issue. Two-shaft tire crusher is EPTly made for outdated tires with lower speed and higher torque to lessen noise and EPT usage.
The blade of the shredEPTis produced of large high quality metal and subjected to Bodycote heat therapy to accomplish the greatest crushing performance.The shredEPTis simple to disassemble and adjust cutter blade and ideal for tearing large, added thick and hard supplies.The thickness assortment of the crushing blade is 25mm-152mm according to the tire type,output and ultimate product. The grinEPTcan procedure OTR tires,huge truck tires,auto tires and so on at the pace of one-30tons whithin 1 hour.
| Product | Enter size | Output dimensions | Cappacity | Motor | Blades quantity | Proportions | Bodyweight |
| TS-800 | 800mm | 50*50mm | one-2T/h | two*22kw | 16pcs | four*two.six*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | 3-5T/h | two*37kw | 20pcs | four.eight*2.eight*three.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | six-8T/h | 2*45kw | 16-30pcs | five*two*3.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | 7-10T/h | two*55kw | 20-24pcs | five.6*2*three.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | 2*75kw | 20-30pcs | six*2.four*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | twenty-30T/h | 2*110kw | 16-24pcs | seven.four*3.two*five.2m | 56T |
two.Rasper
EPT tire shredding system is made to make up to six tons per hour of wire totally free rubber mulch.This technique makes up to a ninety nine% wire cost-free chip ranging in dimension between twelve-25mm relying on the desired dimensions.Following processing,the steel is taken out by our magnetic separation technique.At this position,the wire totally free rubber chips are ready to be colored and employed for landscaping mulch and the metal is completely ready to be baled and marketed to smelters.
| Rasper | Motor | EPT | Capability | Proportions | Weight | Cutting chamber | Final solution |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.4*one.two*two.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.seven*one.seven*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | 700-1T/H | two*2*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-1.5T/H | two.one*two.one*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | two*two.five*four.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | three-6T/H | six.2*2.one*3.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Generating EPT is adopting physical recycling technique and is developed to grind the rubber mulch from the rasper into small granules as good as 1-6mm. The granules are screened and re-circulated right up until the preferred size is arrived at. This Entirely-Automatic Tyre Recycling Line managing in typical temperature, no need to have to insert any other chemical compounds, no pollution to the environment. This is the very best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Potential | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Proportions | one.eight*one.6*two.4m | one.8*1.nine*two.4m | 2.2*two.3*3m |
| Last product | 1-6mm | one-6mm | one-6mm |
4.Miller
Rubber powEPTis the final consequence of ambient tire recycling.At this stage,crumb rubber is ground down into a cleanse powEPTform with nearly all steel and fiber removed.Rubber powEPThas quite a few secondary utilizes from injection molding items,coatings,roofing supplies and numerous asphaltapplications.
Rubber powEPTis normally found in 40-74 microns(.40-.74mm) in size.This micron dimensions metarial has the gain of currently being incorporated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and concluded items.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input merchandise | Large responsibility truck tyres to bicycle tyres | |||
| Enter measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output measurement | shred to thirty-a hundred and twenty mesh rubber powder | |||
| Capability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Overall Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a manufacturing facility or a investing business?
A. We are a maker with 30 several years manufacturing encounter in tire recycling EPT. We have export license, we can provide you the factory prices.
Q2. Can you assure the potential as you talked about ?
A. Definitely yes,other than that,we also offer 3-5years guarantee.
Q3, are you confident the ultimate rubber powEPTcan be completely cleanse out of wire metal or nylon ?
A. The last powEPTpurity can reach 99.nine%. we have magnetic separator which can independent the wire metal from the rubber powder.
